How To Remove Carpet Tape From Concrete?

Property homeowners are known to do living space renovation all around the world. Home décor can mean making huge changes to the house, apartment, or even the real estate.

Architects, homeowners, or designers interested in changing the floor material happen to face great trouble when dealing with remnants of carpet glue. Anyone that has experienced this procedure knows how irritating it can be to deal with stubborn difficult to remove carpet glue from concrete.

Leaving sided carpet glue on your floor area has never been a better option since it is presumably known to collect grime. Plenty of the concrete floors in our homes are covered with either outdoor carpet tape or rugs.

They are however held tight by adhesive carpet tape or carpet tape to keep stagnant. If you are looking to install another type of floor treatment, removing the old carpet over the tape from concrete is very necessary, especially the leftover rug tape.

Using the following steps, you shall gain the ability to thoroughly get rid of the tape residue from the carpet on the concrete.

Step#1

Scrap the tape of the concrete

Removing the old carpet from the concrete first. Then using a scraper that’s built with a sharp edge razor, you will want to scrape as much as you can to remove the carpet glue off the affected surfaces of the concrete.

This will require you to use some of the elbow greases to ease the process. If you are successful enough, you shall only require this first step and learn how to remove carpet tape from concrete.

If that happens, then clean the place by sweeping off the carpet tape chunks.

Step#2

On the glued area, pour some hot water

Hot water is normally used to soften hard things, that’s basic science. However, in this specific case, it will depend on how old the adhesive glue is and the kind of carpet glue that has been used on this concrete floor.

You may have to heat the water depending on the coverage of the damage. Once the water has boiled, you may now mix it with the carpet glue from concrete for roughly one to two minutes.

This being the cheapest way used by everyone to remove adhesive glue, there are other various ways and tips of getting a hold of sticky glued floors. This method does not carry any toxins or toxins making it safe and secure to use.

Gently lower the heating pan of hot water to the concrete floors and spread it evenly to remove the adhesive tape.

Step#3

Gently scrub off the loosened tape

You can opt to use your scrapper or change to a floor scrubber and scrub off the moistened adhesive-sided carpet tape. Do this procedure repeatedly until all is clear.

Step#4

Spread some glue remover

This step is only used if you were unsuccessful in removing the dried carpet tape with procedure number three. Use a heavy glue duty remover or the mastic remover.

Adhesive tape removers have active ingredients meant to chemically loosen the tape, however, based on the instructions that come with these products.

They are known to be very hazardous. While setting these products, wear gloves, to protect your hand.

The rooms should also be properly ventilated. Use your equipment to work on the floors and keep on removing the excess tape left by the attachment of the previous carpet.

Step#5

Sand your floor

After removing all the surfaces with the heavy and stubborn adhesive carpet tape, you are required to ensure that the pores too are off the adhesive carpet glue from concrete.

In case there is any tape residue on the floor, then the acid stains will not be able to pass it. That is why you are advised to sand it.

Use a buffing machine or a floor sander that has sanding disks to get the work done.

Also use a very aggressive grit to get the difficult carpet tape bulk then, later on, switch it to a finer grit to complete the sanding along the floor. Ensure that you are very careful when sanding not to sand deeper.

When you excessively sand it, then you shall have exposed the aggregate. Moreover, sanding can make the concrete highly porous, however soaking up more sealer and acid stain.

Step#6

Troubleshoot

With all these methods from using a scraper tool to boiling fluid to using good acetone and you manage to be unsuccessful in removing the tape.

Then you shall have to troubleshoot the issue. One other similar product you can use is the heat gun.

Handling it is very easy since it helps in softening the-sided carpet tape. In case you are missing a heat gun you can use an iron.

Be cautious when you use an iron. You shall first need a thin piece of cloth to place on the surface part.

If still you are left with some glue debris, you will want to;

  • apply a thin or thick layering of coat
  • different scheme colors
  • scored patterns
  • choose to use watercolor paints in between those coats to mask that residue.

Piece of advice based on carpet strips

A carpet in today’s century is reinforced along the outside edge using the tack strip. These are nailed to the concrete or wood.

When you take out those tack strips, then some holes are left behind which may destroy the concrete in the process.

This can be fixed, but why go to that extent of pulling the nails off the concrete or scraping stretched duct? Consider and try to remove carpet adhesive from the concrete by neutralizing and rinsing the floor.

Before you decide to apply any sealer, make sure to fill the strip holes away so that the divot can longer be there.

Ensure that you butter up or smoothen up the top of your concrete floor or tiles to avoid small bumps.

Conclusion.

Getting rid of all types of carpet adhesive glue from concrete floors can be hard. From some tested DIY, you can use vinegar on non-concrete floors.

However, you are not recommended to allow this to interfere with your designed tiles décor or make you change your floor style. The ultimate goal is to find or buy the best products to help remove the carpet stain or tape.

In case you are unable to remove the double-sided carpet tape without a partner, or if you are clumsy with harmful chemicals, you can always ask for help from experts. Although it is advisable to grab yourself some good tools and follow this guide to work on removing your indoor carpet or outdoor carpet residue tape just like any other problem.

Anyway, learn these easier steps of how to remove carpet glue and you shall be an expert in the field of residue tape removal.

Physical And Chemical Process